Rick's Home DIY Projects

For those of you who have an aging dog, its likely that you have investigated steps or ramps to assist them in accessing chairs, couches and beds. There are several options available for purchase. However, I thought this might be a simple project to undertake, using basic wood material and carpeting.  Design As with most of my home projects, I first start by modeling on the free web modeling software - SketchUp . My plan was to construct this ramp using 2x2's, plywood, and carpeting. 1st decision to make - steps vs. ramp. I opted to go with a ramp, as it is simpler in design & fabrication, and it likely would be easier for our dog to use (Our dog is a smaller one ~15-20 lbs).  Next decision - size . I needed to determine a physical size that would a) be high enough to access furniture surfaces the dog uses, b) big enough for the dog to climb, and c) utilizes common material sizes to minimize cuts. We currently have some small "footstools" that the dog has used to get...

 In my previous post, I started the renovation of my garage "workshop" by reorganizing my tools. After installing a wall area with peg board, I constructed a storage rack for my cordless power tools .  The next step of my garage makeover was to construct a simple workbench. With limited wall space in the garage, the workbench needed to compact, yet big enough for working on smaller projects. Additionally, I wanted it to also function as a storage space for small items, and also allow for storage underneath.  Design My 1st step was to determine the workbench size. With sheets of 2ft by 4ft plywood readily available at local stores (I used Menards for this project), I decided to save extra wood cutting and use this as the surface footprint. Next, I decided that a 2nd shelf below the main work surface would be great for storing some larger items, keeping them off the floor. Finally, I wanted a way to store small items used at the workbench, so I decided to add 2 small storag...